齒條安裝說明
為了可以更順利的安裝連接齒條，標準齒條的兩端端面將會加工為半齒齒底；以方便跟下一支齒條的端面半齒齒底連接成一個全齒。下圖表示為兩支齒條如何連接，并由齒規(guī)可以擁有準確的齒距位置。關于斜齒齒條相接可以藉由反向齒規(guī)調整精度的配合，以便可以精準的連接齒條。
1.而在齒條安裝相接時，我們建議先鎖上齒條側面的安裝孔，并依照基座上相對應的孔位依序鎖上；并藉由安裝齒規(guī)可以很準確的將齒條的齒距位置安裝完成。
2.最后再將齒條上的兩端側面的固定銷孔給固定上即完成安裝。
Instruction of Rack Assembly
To assemble connected racks more smothly,2 ends of a standard rack would add half tooth which is convenient for next half tooth of next rack to be connected to a complete tooth.The following drawing shows how 2 racks connect and tooth gauge can control pitch position accurately. With regards to connection of helical racks it can beconnected accurately by opposite tooth gauge.
1.When connecting racks,we recommend lock bores on the sides of rack first,and lock bores by the sequence of the foundation.With assembling the tooth gauge,pitch position of racks can be assembled accurately and completely.
2.last,lock the positon pinson 2sides of rack;the assembly is completed.
